Food safe FDA Certificate Liquid Silicone Rubber for Silicone Baby's Nipple gasket sealant
|End use||food mold, nipples|
|Curing type||Platinum vulcanization|
|Shelf life||12 months|
|Payment term||L/C, T/T, Western Union, Paypal|
This data is a typical reference value and is for reference only.
Here is a look at the LSR molding process:
1. LSR A + B components typically come in a 5-gallon pail or 55-gallon drum. A process controlled pumping kit presses down on the buckets to force the material into the static mixer and feed into the injection unit.
2. Then, streams of pigment can be added and controlled. In the injection, press material will be mixed together additionally with a screw and pushed forward to create a “shot” of material, or the amount needed to fill the mold.
3. After the material is injected into the mold, it will then stay clamped together to cure the LSR. Then, either an operator or a robot will remove the cured product from the mold and the cycle repeats. It is a very quick efficient process that typically averages 30 seconds.
Packing & Storage
If you want more details, please contact us.