RUI-HE 6250-15® is a kind of two-component liquid silicone rubber for injection molding processes, consisted of part A and part B. It can be used to produce kitchen utensils with fast setting,high transparent, high tear resistance and good resistance to yellow. All LSR are platinum cured (vulcanized) materials which are mixed in a 1 : 1 ratio by weight.
Key Features and Benefits
|Unit||Part - A||Part - B|
|Shore A Hardness||A||15±2|
|Tear off permanent deformation||%||4.3|
These figures are for reference only, please contact us for details.
Mixing ratio of components A : B = 1 : 1.
Vulcanization: 150 °C / 5 min
Because of the outstanding properties 6250-15® liquid silicone rubber is particularly suitable for Kitchen utensils such as pot spoon, spatula, bowl, etc.
Rui-He 6250-15® Liquid silicone rubber obtained the following test certificate: RoHS, FDA.21.177, REACH, PAHS, ISO9001:2016, etc.
Packaging & Storage
Available in 20kg pails or 200kg drums.
Store in a cool, dry place out of direct sunlight, use it within 12 months from the day of manufacture.
This product cannot be contacted with compounds containing N, P, S to avoid affecting the catalytic effect of platinum.
1. What's silicone products you are making?
--liquid silicone rubber, silicone rubber, silicone oil; Platinum agent:
-- According to different silicone molds, our silicone has different viscosity, and cause different hardness,
density to meet the requests from client.
2. Do you offer free sample to client?
--Yes, we can provide the sample for test.
3. How about the quality control in your factory?
--We have professional QC team.
--Each batch of silicone rubber must be tested by our safe quality examination system.
4. How to remove the bubbles during my mould making?
--After mixing liquid silicone with curing agent, please put the material into vacuum machine to take off the bubbles.
5. How to get good silicone mould to use longer time?
--The best way is:
1, Please choose the right liquid silicone according to your products.
2, Don't use any silicone oil in mold making, because it can make the silicone mould become too soft to use.
3, Silicone mould can be used longer after the whole silicone mould fully cured, so it's better to wait 2 hours after mould finished.
6. Why silicone rubber add curing agent after mixing a lot of bubbles?
--This is normal physical phenomena. The liquid will produce a large number of bubbles in the mixing time, so, it must pass through the vacuum exhaust bubble treatment.
If you need to know the prices of our silicone rubbers, please contact us. We do not provide prices in website because prices fluctuate for many reasons.