Highlight:
medical grade platinum cured silicone
, non toxic silicone rubber
Cables Platinum Cure Silicone Rubber Rapid Vulcanization ODM / OEM Service
Platinum Cure Solid Silicone Rubber Rapid Vulcanization for Electronic Parts On Automobiles
Description
Rui - He RH7022P® is a kind of solid silicone rubber for extrusion processes, catalyzed by platinum. This silicone rubber is particularly developed for manufacturing all kinds of extruded tubes and profiled bars.
Typical Properties
| RH7022P® |
| |
Unit |
|
| Appearance |
/ |
translucent |
| Shore A Hardness |
A |
70-75 |
| Tensile Strength |
MPa·s |
≥ 6.0 |
| Elongation |
% |
≥ 150 |
| Tear Strength |
KN / m |
≥ 8.0 |
| Linear Shrinkage |
% |
≤ 0.5 |
| Plasticity |
% |
250-290 |
These figures are for reference only, please contact us for details.
Key Features and Benefits
| Fantastic extrusion performance |
| High resistance to yellow |
| Excellent stability and flexibility at low temperatures |
| Outstanding aging resistance |
| Sensational weather resistance |
| High stability to ozone and ultraviolet light |
| excellent dielectric behavior over a wide range of temperatures |
| Easy pigmentable with the LSR Color Pastes |
Packaging & Storage
Available packed in 20kg cartons.
Store in a cool, dry place out of direct sunlight, use it within 12 months from the day of manufacture.
Certificate
Rui-He RH7022P® silicone rubber obtained the following test certificate: RoHS, FDA, REACH, PAHS, ISO9001:2016, etc.
Applications
Because of the outstanding properties RH7022P® silicone rubber is particularly suitable for tubes, bars, cold shrinkage termination, insulation tube, joint, and breakout.
Notice
This product cannot be contacted with compounds containing N, P, S to avoid affecting the catalytic effect of platinum.
FAQ
Q: Does the silicone mold get burnt out?
A: Our silicone rubber has added a special material which can increase its resistance to high temperature. However, it gets heat when added the curing agent. You ought to demold the product within 3 minutes to avoid this problem.
Q: Why does the silicone rubber appear to be dry outside but wet inside?
A: It gets solidified after absorbing moisture from the air. You can add 0.05% water into the silicon rubber and stir over a low speed briefly when you use it.
Q: May I have some samples with my design?
A: Yes, please contact us first and send your favorite design.
If you need to know the prices of our silicone rubbers, please contact us. We do not provide prices on the website because prices fluctuate for many reasons.
Your message must be between 20-3,000 characters!
