Solid Silicone Rubber RH7022P® High Elongation Good Transparency for Wine Glass with ROHS Certification
RH7022P is a kind of solid silicone rubber, catalyzed by platium. It can be used to produce something high elongation and low hardness, such as swimming caps, food wrap.
Key Features and Benefits
|Shore A Hardness||A||
|Tensile Strength||MPa||≥ 6.0|
|Tear Strength||KN / m||≥ 8.0|
|Linear Shrinkage||%||≤ 0.1|
These figures are for reference only, please contact us for details.
Vulcanization: 150 °C / 5 min
Because of the outstanding properties RH7022P® solid silicone rubber is particularly suitable for swimming caps, food wrappers, and shower heads.
Rui-He RH7022P® solid silicone rubber obtained the following test certificate: RoHS, FDA, REACH, PAHS, ISO9001:2016, etc.
Free technical training on products usage and operation instructions
Free customer service to solve technical issues
Free mold opening technologies
Reach the international standard high quality with competitive price
Passed the certificates including the FDA, RoHS, MSDS, SGS, ISO9001:2016
Online and on-site follow-up service for product demonstration
Any of our products with quality problems will be replaced within 3 months after purchase
Free sample shipped by UPS or EMS for your test!
Packaging & Storage
Available packed in 20 kg cartons.
Store in a cool, dry place out of direct sunlight, use it within 12 months from the day of manufacture.
This product cannot be contacted with compounds containing N, P, S to avoid affecting the catalytic effect of platinum.
Q: Why is the tear strength of the silicone mold weak?
A: There are three reasons:
In order to reduce the viscosity of silicone rubber and pursue a good quality, you may add a lot of silicone oil into the silicon rubber when making molds. In fact, it might have just the opposite effect. The tension and the tear strength will be reduced badly with the addition of silicon oil. And the silicon molds will be in a weak and flimsy manner.
You may add too much catalyst into the silicone rubber, we suggest customers add catalyst no more than 5%, 2%will be perfect.
You may use the silicone mold too early after it finished. We suggest the customer begin using the molds after 24 hours. What’s more, it will be better if you can make an outer mold to protect the silicone mold.
If you need to know the prices of our silicone rubbers, please contact us. We do not provide prices on the website because prices fluctuate for many reasons.