Silicone Mold Making Rubber RH9240 - 40 with 10:1 Mix Ratio (Part A: Part B) for Label
Rui-He RH9240 - 40 is a two-component liquid silicone rubber for injection molding processes.
It is two-part RTV liquid silicone rubber catalyzed by platinum, low viscosity, mixing ratio of parts A: B = 10: 1.
Key Features and Typical Benefits
|RH9240 - 40|
|Unit||Part - A||Part - B|
|Shore A hardness||A||40 ± 2|
|Tensile strength||Mpa||≥ 5.0|
|Tear strength||KN / m||≥ 15|
|Linear shrinkage rate||%||≤ 0.5|
These figures are for reference only, please contact us for details.
Typical properties of the vulcanisate:
The mixing ratio of components A: B = 10: 1
40℃×12h, The actual curing conditions can be prolonged or shortened according to the thickness and size of the mold.
1. RH9240 - 40 LRS rtv-2 soft silicone rubber is suitable to make silicone rubber molds for the products with complex patterns on the surface, such as arts & crafts, detailed sculptures, soap mold, candle molds, shoe molds and so on.
2. Soft silicone is also an excellent material for encapsulant, sealing and potting, such as potting electronics, air filter etc.
3. Suitable for making finished products, such as silicone artificial breast, silicone bra, silicone breast pad etc.
4. Also suitable for producing silicone simulations, such as human skin, silicone prosthesis, silicone mask etc.
Rui-He RH9240 - 40 Liquid silicone rubber obtained the following test certificate: Rohs, FDA, MSDS, LFGB, ETC.
Packaging & Storage
This product cannot be contacted with compounds containing N, P, S to avoid affecting the catalytic effect of platinum.
If you need to know the prices of our silicone rubbers, please contact us. We do not provide prices on the website because prices fluctuate for many reasons.