High Transparent Temperature-resistant Optical Liquid Silicone Rubber for LED Secondary Lenses
Product Specifications
| Attribute |
Value |
| Application |
LED secondary lenses |
| Sample |
Available |
| Appearance |
Transparent |
| HS code |
391000000 |
| Shelf life |
12 Months |
| Material |
100% Silicone Material |
| Certificate |
FAD.MSDS. ROHS.LFGB. ISO 9001:2015 |
| Mixing ratio |
1:1 |
| Features |
Low Viscosity |
| MOQ |
20 KGS |
Product Overview
Optical Silicone Rubber RH5350-60KSA/B is a platinum-cured silicone rubber designed for high-quality silicone products. This two-component liquid silicone rubber is specifically formulated for injection molding processes, making it ideal for producing various transparent glass-like products including LED secondary lenses and glasses nose pads.
Technical Specifications
Typical vulcanization conditions: A:B=1:1, 150°C/5min
Molding process: A/B 1:1 Heating injection molding
Packing: A:B, 20KG/bucket or 200KG/bucket
Storage: Please seal and keep at room temperature
Important Note: This product cannot contact with N, P, S compounds to avoid platinum catalyst poisoning.
Key Features
- Simple operation without additional curing agent
- Fast curing at low temperature (120°C-140°C)
- Environmentally friendly - no unpleasant odor or harmful gases released
- Excellent anti-yellowing property
- Stable product size
Technical Properties
| Property |
Unit |
Part - A |
Part - B |
| Appearance |
/ |
transparent |
transparent |
| Viscosity |
Pa.s |
16 |
|
| Shore A Hardness |
A |
60 |
|
| Density |
g/cm3 |
1.02 |
|
| Light Transmittance |
/ |
94 |
|
| Resilience |
% |
45 |
|
| Tensile Strength |
MPa |
5.5 |
|
| Elongation |
% |
130 |
|
| Tear Strength |
KN/m |
10 |
|
| Tensile Set |
% |
≤3.2 |
|
| Line shrinkage |
% |
≤2.4 |
|
Note: These figures are for reference only. Please contact us for detailed specifications. The mixing ratio of components A:B = 1:1. Vulcanization: 150°C / 5 min
Packaging & Storage
Available in 20kg pails or 200kg drums. Store in a cool, dry place out of direct sunlight. Use within 12 months from manufacture date.
Certifications
RH5350-60KSA/B® Liquid silicone rubber has obtained the following certifications: FDA 21 CFR 177.2600, RoHS, BfR, REACH, PAHS, UL, ISO9001:2015.
Applications
- Square, kink-free tubing for furnace pressure switches
- Sound and vibration dampening in automotive drive shaft applications
- Shaft sealing rings
- Silicone O rings
- Window and door seals
- Sealing gaskets and oven door gaskets
- Wire and cable jacketing
- Electrical Safety Stinger Covers
- Conductive profiled silicone seals
About Guangzhou Rui-He New Material Scientific Co., Ltd
Guangzhou Rui-He New Material Scientific Co., Ltd, established in 2004, specializes in research, development, production, and distribution of environmentally-friendly silicone materials. Our headquarters is located in Huadu district, Guangzhou, China.
Our products are widely used in various industries including medical, electronics, telecommunication, aeronautics, astronautics, automobile, textile, mechanics, sports and daily necessities. With 15 years of experience, we are recognized as a leading silicone rubber manufacturer with over 1,000 types of silicone rubber and an annual production capacity of 12,000 tons.
Our product range includes LSR liquid silicone rubber, solid silicone rubber, HTV silicone rubber, RTV-2 molding silicone rubber, precipitation silicone rubber, injection molding silicone rubber, flame retardant silicone rubber, high temperature silicone rubber, electrical insulating silicone rubber, potting silicone rubber, medical silicone rubber, and specialty silicone rubber for various applications.
Quality Control
Each batch of silicone rubber undergoes rigorous testing through our quality examination system, including physical property testing and chemical property testing using equipment that meets international quality standards.
Frequently Asked Questions
1. What silicone products do you manufacture?
We produce liquid silicone rubber, silicone rubber, silicone oil, and platinum agents. Our silicone products come in different viscosities, hardness levels, and densities to meet specific client requirements.
2. Do you offer free samples to clients?
Yes, we can provide samples for testing purposes.
3. How is quality controlled in your factory?
We have a professional QC team and each batch undergoes thorough testing through our quality examination system.
4. How to remove bubbles during mold making?
After mixing liquid silicone with curing agent, place the material into a vacuum machine to remove bubbles.
5. How to extend silicone mold lifespan?
Choose the right liquid silicone for your product, avoid using silicone oil in mold making, and allow the mold to fully cure for at least 2 hours after completion.
6. Why does silicone rubber produce bubbles when mixing with curing agent?
This is a normal physical phenomenon. The liquid produces bubbles during mixing, which must be removed through vacuum treatment.
Recommended Products
Your message must be between 20-3,000 characters!
