Guangzhou Ruihe New Material Technology Co.,Ltd. was eatablished in 2004. It is a high-tech private enterprise specializing in the development and production of organic silicone materials, with independent brands. Our company covers power, cable, medical, baby, baby, food, and rubber and other industries. It has formed a producet cluster of eight series and more than 100 product brands, with annual output of 30000 tons/year. Continuously improve the quality of products, and through FDA, LFGB, REACH, PaHS, UL, SGS, biocompatibility and other product certification and ROHS green environmentalcertification , to meet the downstream industry requirements for product quality, environmental protection and other aspects.
This series is Two components RTV-2 liquid silicone rubber with high strength, good transparency and excellent processing performance.The rubber rate is stable, it is addition Cure Silicone Rubber for Pouring Molds, Hand board silicone.
Due to very low shrinkage and flexibility, platinum silicone rubber is found in a wide range of application including ice cream moulds, fondant mold, ice mold, silicone cracker mold, sculpture mold, etc.
These figures are for reference only, please contact us for details.
Mixing ratio of components A : B = 1 : 1.
Packaging & Storage
Available in 20kg pails or 200kg drums.
Store in a cool, dry place out of direct sunlight, use it within 12 months from the day of manufacture.
This product cannot be contacted with compounds containing N, P, S to avoid affecting the catalytic effect of platinum.
1. What's silicone products you are making?
--liquid silicone rubber, silicone rubber, silicone oil; Platinum agent:
-- According to different silicone molds, our silicone has different viscosity, and cause different hardness,
density to meet the requests from client.
2. Do you offer free sample to client?
--Yes, we can provide the sample for test.
3. How about the quality control in your factory?
--We have professional QC team.
--Each batch of silicone rubber must be tested by our safe quality examination system.
4. How to remove the bubbles during my mould making?
--After mixing liquid silicone with curing agent, please put the material into vacuum machine to take off the bubbles.
5. How to get good silicone mould to use longer time?
--The best way is:
1, Please choose the right liquid silicone according to your products.
2, Don't use any silicone oil in mold making, because it can make the silicone mould become too soft to use.
3, Silicone mould can be used longer after the whole silicone mould fully cured, so it's better to wait 2 hours after mould finished.
6. Why silicone rubber add curing agent after mixing a lot of bubbles?
--This is normal physical phenomena. The liquid will produce a large number of bubbles in the mixing time, so, it must pass through the vacuum exhaust bubble treatment.
If you need to know the prices of our silicone rubbers, please contact us. We do not provide prices in website because prices fluctuate for many reasons.