Good Flow Performance Strong Adhesion LSR Liquid Silicone Rubber For Label / Trademark

Strong Adhesion With Excellent Thermal Stability Liquid Silicone Rubber For Label & Trademark

Description

RUI-HE 9240-40® is a kind of two-component liquid silicone rubber for injection molding processes, consisted of part A and part B. It can be used to produce the production of trademarks and can be used for pressure cloth, pressure made trademark, or for the printing and the same kind of silicone adhesive with fast curing, strong adhesion, good flow performance and excellent thermal stability. All LSR are platinum cured (vulcanized) materials which are mixed in a 10 : 1 ratio by weight.

Key Features and Benefits

• Stable dimensionality
• Good mold release property
• High adhesion to the cloth
• Convenient use
• Small viscosity of the rubber compound
• Low linear shrinkage
• Resistance to pulling
• Strong flexibility
• Excellent ozone and ultraviolet aging resistance
• Good three-dimensional effect
• Non-toxic, tasteless, and very biocompatible
• Fast ccuring 
• Strong adhesive
• Good flow performance
• With excellent thermal stability

Typical Properties

These figures are for reference only, please contact us for details.

Mixing ratio of components A : B = 10 : 1.

Vulcanization: 150 °C / 5 min

Applications

Because of the outstanding properties 9240-40® liquid silicone rubber is particularly suitable for the production of silicone rubber garment signs. It can be uesd as a trademark separately, and can also be used for pressing cloth, pressing leather and metal, paper, plastic, glass, leather and other trademarks and anti-slip coating.

Certificate

Rui-He 9240-40® Liquid silicone rubber obtained the following test certificate: RoHS, FDA.21.177, REACH, PAHS, ISO9001:2016, etc

Packaging & Storage

Available in 20kg pails or 200kg drums.

Store in a cool, dry place out of direct sunlight, use it within 12 months from the day of manufacture.

Notice

This product cannot be contacted with compounds containing N, P, S to avoid affecting the catalytic effect of platinum.

Tips

Q: How many kgs of silicone I need to make a mold, like 1m*1m?

A: First, you change the "m" to "cm". Then the V(volume)=100cm(length)*100cm(width)*1.5cm(height or thickness) =15000cm³

→ the density of the liquid silicone is 1.1g/cm³→ the quantity= 15000cm³* 1.1g/cm³=16500g(16.5kg)

Q: How can I know the thickness of the silicone mold?

A: For the pouring way, if you do not have a plaster have a base to keep its shape (like square), then we usually suggest that 2-3cm is enough. If yes, then 1-1.5 cm is enough.

Q: Why is there not enough 25kgs silicone in the drum?

A: V=m/p. because the different of the silicone viscosity, so there will be a little difference. When the viscosity is lower, there will be 26kgs or more. In contrast, there will be 24kgs or little.

If you need to know the prices of our silicone rubbers, please contact us. We do not provide prices in website because prices fluctuate for many reasons.