Fast Production Machining Liquid Silicone Rubber injection molding compund Material Headphones & Watch
RH6250-40T is two-component Platinum curing liquid silicone rubber for Injection mold making . It can be used for mold making for anti-slip mat,artificial prosthesis, making soft silicone rubber products like human body shape, bra pads, diving glasses, shoulder pads, patch, anti-slip mat, watch, headphones,making and also can be used for pouring material for electronic and electrical parts, etc.
Key Features and Benefits
Vulcanisates consisting of RH6250-40T LSR are distinguished by the following properties:
|Unit||Part - A||Part - B|
|Viscosity||mPa.s||1400000 - 2000000||1400000 - 2000000|
|Density||g/cm 3||1.11 ± 0.02|
|Shore A hardness||A||40±2|
|Light Transmitance||%||≥ 80|
|Tensile strength||Mpa||≥ 7.5|
|Tear strength||KN/m||≥ 20|
|Linear shrinkage rate||%||≤ 0.5|
|Rebound set||%||≥ 55|
These figures are for reference only, please contact us for details.
Typical properties of the vulcanisate:
The mixing ratio of components A: B = 1: 1.
Vulcanisation: 5 min. 150 °C + 4 hrs. 200 °C post cure
Rui-He® RH6250 - 40T are Platinum curing mainly used for Watch, Headphone, silicone prostheses, silicone mask, ultra-realistic replicas of the face, silicone fake skin, silicone animatronic skin, silicone baby mat, silicone baby doll, etc.
Rui-He RH6250 - 40T Two components Liquid silicone rubber obtained the following test certificate: RoHS, FDA, MSDS, LFGB, ETC.
Packaging & Storage
This product cannot be contacted with compounds containing N, P, S to avoid affecting the catalytic effect of platinum.
Q: Why is the silicon mold oily?
A: The molding silicone rubber itself doesn’t contain any oil, so it won’t be oily. If the mold is oily, it may be because of two reasons:
You add the compound silicone oil (the compound of silicon oil and white oil). The white oil is not silicon oil but a kind of petrochemicals.
Your supplier adds to much silicone oil when they producing silicone rubber or reducing the hardness of silicone rubber.
Q: How to get rid of the bubbles during my mold making?
A: After mixing liquid silicone with a curing agent, please put the materials into the vacuum machine to take off the bubbles
If you need to know the prices of our silicone rubbers, please contact us. We do not provide prices on the website because prices fluctuate for many reasons.