Comfortable Medical Grade Silicone Rubber UV Light Resistance Fit Breathing Nasal Mask

Comfortable Medical Grade Silicone Rubber UV Light Resistance Fit Breathing Nasal Mask

Description

RH6250-40YH is medical grade liquid silicone rubber for injection molding processes. At higher temperatures the safety operation time shortened. LSR RH6250-40YH liquid silicone rubber is platinum cured(vulcanized) materials which are mixed in a 1:1 ratio by weight. 

This product is suitable for a two-component injection molding process. LSR is platinum cured(vulcanized) materials which are mixed in a 1:1 ratio by weight.

Why Choose Us?

1. 15 years of manufacturing experience focus on silicone rubber

2. All Products shipped is Up to FDA, Rohs, Reach, LFGB, testing standard

3. Overall quality controlling procedure and perfect service to you

4. Offer to tailor the order accordance with customer's requirement in detail.

5. 800 tons solid silicone rubber, 300 tons LSR silicone rubber and 200 tons silicone oil every month

6. Special organic silicon R&D team and precision inspection instruments equipped

7. Automatic manufacturing equipment adopted, which ensure the products shipped quality well largely

Typical Properties

These figures are for reference only, please contact us for details.

Typical properties of the vulcanisate:

The mixing ratio of components A: B = 1: 1.

Production Process

1. Add raw material

2. Stir and mix

3. Sampling inspection (Viscosity detection, Hardness test, Tear resistance)

4. Mass production

5. Label

6. Packing

7. Transport

Certificate

Rui-He RH6250-40YH Liquid silicone rubber obtained the following test certificate: RoHS, FDA, MSDS, LFGB, ISO9001:2016.

Packaging & Storage

• RH6250-40YH Medical is available in 20kgs pails or 200kgs drums.
• Store in a cool dry place out of direct sunlight, use it within 12 months from the day of manufacture.

FAQ

Q: Why is the tear strength of the silicone mold weak?

A: There are three reasons:

1. In order to reduce the viscosity of silicone rubber and pursue a good quality, you may add a lot of silicone oil into the silicon rubber when making molds. In fact, it might have just the opposite effect. The tension and the tear strength will be reduced badly with the addition of silicon oil. And the silicon molds will be in a weak and flimsy manner.
2. You may add too much catalyst into the silicone rubber, we suggest customers add catalyst no more than 5%, 2%will be perfect.
3. You may use the silicone mold too early after it finished. We suggest the customer begin using the molds after 24 hours. What’s more, it will be better if you can make an outer mold to protect the silicone mold.

Notice

This product cannot be contacted with compounds containing N, P, S to avoid affecting the catalytic effect of platinum.

If you need to know the prices of our silicone rubbers, please contact us. We do not provide prices on the website because prices fluctuate for many reasons.