GUANGZHOU RUI-HE NEW MATERIAL SCIENTIFIC Co. , LTD

Tube Connector Medical Grade Platinum Cured Silicone Rapid Vulcanization

Product Details:
Place of Origin: Guangzhou,China
Brand Name: RUI - HE
Certification: FDA,MSDS,LFGB,RoHs,ISO9001-2016
Model Number: LSR M 6250-30YH
Payment & Shipping Terms:
Minimum Order Quantity: 20KG/200KG
Price: Negotiation
Packaging Details: 20 kg pails or 200 kg drums
Delivery Time: 5-15 days
Payment Terms: Western Union, L/C, T/T, Paypal,
Supply Ability: 1000 tons per day
  • Detail Information
  • Product Description

Detail Information

Features: Excellent Biocompatibility Advantage: 15 Years Experience Factory
Incoterms: EXW, FOB, CIF Sample: Available
Port: Shenzhen / Guangzhou Grade: Medical
High Light:

clear silicone rubber

,

fast curing silicone rubber

Product Description

 

Medical Grade Platinum Cured Silicone Surgical Grade Silicone Rubber Pure For Tube Connector

 

 

Typical Properties

 

LSR M 6250-30YH

Properties

Unit

A

B

Appearance

/

transparent

transparent

Viscosity

mPa.s

1200000 - 1800000

Density

g/cm3

1.1 ± 0.02

Shore A Hardness

A/JLS

30 ± 2

Tensile Strength

MPa

≥ 7.0

Elongation at break

%

≥ 650

Tear Strength

KN/m

≥ 15

Linear Shrinkage

%

≤ 0.1

Tensile set

%

≥ 2.6

Rebound

%

≥ 45

Compression set

(22 hrs at 175℃) %

≤ 30

            These figures are for reference only, please contact us for details.

 

 

            Operation ways of Injection Molding


1, mixed: A component (based glue) and Part B (curing agent) ratio of 10:1 or 1:1 by weight, mixed, mixed either manually or using equipment.

2, vacuuming: mixed silicone A and B, When used in small amounts can be in a vacuum desiccator under vacuum, the volume will foamed plastic material can be increased 4-5 times, so degassing vessel volume should be less than bulky plastic material 4 to 5 times, after a few minutes gel volume returns to normal, no air bubbles escaping when the surface (about 10 minutes) to complete the degassing step.

3, clean your Original mold (sex toys molds), please note that the molds won’t contact with condensation silicone rubber before, and not contains a chemical element such as N.S.P, otherwise, the silicone won’t be cured.

5. cured the silicone rubber at 90℃ to 150℃, then the silicone will be cured, and then demould.

 

 

 

Tube Connector Medical Grade Platinum Cured Silicone Rapid Vulcanization 0Tube Connector Medical Grade Platinum Cured Silicone Rapid Vulcanization 1

 

 

Key Features and Benefits

 

  • Rapid vulcanization
  • Sensational weather resistance
  • Sensational weather resistance
  • Excellent resistance to acid and alkali
  • High stability to ozone and ultraviolet light
  • High thermal stability
  • Sterilizable with ethylene oxide, steam and gamma radiation
  • Excellent biocompatibility

 

 

Certificates

 

Rui-He silicone rubber obtained the following test certificate: RoHS, FDA, MSDS, LFGB, ISO9001:2016.

 

 

 

Tube Connector Medical Grade Platinum Cured Silicone Rapid Vulcanization 2

 

 

 

 

Packaging & Storage

 

Packaging Details

This kind of rubber is packed in 20kg/plastic barrels or 200KG/iron drum with an inside plastic bag.

Port

HUANGPU, GUANGZHOU

Lead Time

1 – 1000 (Kilograms)
1001 – 10000 (Kilograms)

7 days
15 days

 

Store in a cool dry place out of direct sunlight, use it within 12 months from the day of manufacture.

Tube Connector Medical Grade Platinum Cured Silicone Rapid Vulcanization 3

 

Production Process

 

  1. Add raw material

  2. Stir and mix

  3. Sampling inspection

  4. (Viscosity detection, Hardness test, Tear resistance)

  5. Mass production

  6. Label

  7. Packing

  8. Transport

 

 

Instructions

 

1. LSR A + B components typically come in a 5-gallon pail or 55-gallon drum. A process controlled pumping kit presses down on the buckets to force the material into the static mixer and feed into the injection unit.

 

2. Then, streams of pigment can be added and controlled. In the injection, press material will be mixed together additionally with a screw and pushed forward to create a “shot” of material, or the amount needed to fill the mold.

 

3. After the material is injected into the mold, it will then stay clamped together to cure the LSR. Then, either an operator or a robot will remove the cured product from the mold and the cycle repeats. It is a very quick efficient process that typically averages 30 seconds.

 

 

 

Notice

 

This product cannot be contacted with compounds containing N, P, S to avoid affecting the catalytic effect of platinum.

Tube Connector Medical Grade Platinum Cured Silicone Rapid Vulcanization 4
 
 

If you need to know the prices of our silicone rubbers, please contact us. We do not provide prices on the website because prices fluctuate for many reasons.
 

    

Get in touch with us

Enter Your Message

You Might Be Into These