|Place of Origin:||Guangzhou,China|
|Brand Name:||Rui-He liquid silicone rubber|
Payment & Shipping Terms:
|Minimum Order Quantity:||20KG/200KG|
|Packaging Details:||20 kg pails or 200 kg drums|
|Payment Terms:||Western Union, L/C, T/T, Paypal, MoneyGram|
|Supply Ability:||1000 tons per day|
|Usage:||Negative Pressure Ball, Catheter Connector, Etc.||Port:||Shenzhen / Guangzhou|
|Recovery:||High Recovery After Puncture||Stability:||High Thermal Stability|
|Hardness:||30 Shore A||Advantage:||15 Years Experience Factory|
medical grade liquid silicone rubber,
clear silicone rubber
High Stability Medical Grade Liquid Silicone Rubber Excellent Biocompatibility For Medical Ball
|Shore A Hardness||A/JLS||30±2|
|Elongation at break||%||≥650|
|Compression set||(22 hrs at 175℃) %||≤30|
These figures are for reference only, please contact us for details.
LSR is platinum cured(vulcanized) materials which are mixed in a 1:1 ratio by weight.
Typical properties of the vulcanisate: mixing ratio of components A: B = 1: 1.
Key Features and Benefits:
Rui-He RH6250-30YH Liquid silicone rubber obtained the following test certificate: RoHS, FDA, MSDS, LFGB, ISO9001:2016.
Packaging & Storage
|Accepted Payment||T/T, L/C at sight, Western Union, Paypal, VISA, Credit Card, etc.|
|Leading time :||It takes 5-15 days after receiving the full deposit|
|Trade Term:||FOB, EXW, CIF.|
|Freight:||Ocean / Air / Courier|
This product cannot be contacted with compounds containing N, P, S to avoid affecting the catalytic effect of platinum.
Here is a look at the LSR molding process:
1. LSR A + B components typically come in a 5-gallon pail or 55-gallon drum. A process controlled pumping kit presses down on the buckets to force the material into the static mixer and feed into the injection unit.
2. Then, streams of pigment can be added and controlled. In the injection, press material will be mixed together additionally with a screw and pushed forward to create a “shot” of material, or the amount needed to fill the mold.
3. After the material is injected into the mold, it will then stay clamped together to cure the LSR. Then, either an operator or a robot will remove the cured product from the mold and the cycle repeats. It is a very quick efficient process that typically averages 30 seconds.
If you need to know the prices of our silicone rubbers, please contact us. We do not provide prices on the website because prices fluctuate for many reasons.