Good qulity liquid silicone injection molding process is highly automated with short cycle times
A Liquid Silicone Rubber material is a two-part platinum-cured elastomer that can be injected into a mold cavity to manufacture a part.
LSR is very versatile in the elastomer industry and is seen across a whole spectrum of parts from consumer products to medical devices and everything in between.
Most silicone rubber varieties share in common naturally-occurring qualities of high electrical insulation, resistance to extreme temperatures, chemical inertness and resilience in harsh environments.
Ruihe RH6250 SERIES Liquid Silicone Rubber (F-LSR) is specifically designed for liquid injection molding.
The product is supplied as a two component, soft fluorosilicone paste. It heat cures to a 60 durometer material.
The cured rubber product is resistant to a wide variety of solvents and chemicals over a wide temperature range
of -63 to +175°C (-82° to +347°F) under immersion conditions, and up to +225°C (+437°F) in dry heat.
|Physical properties||Testing method||Unit||RH6250-40A/B||RH6250-50A/B||RH6250-60A/B||RH6250-70A/B||RH6250-71A/B|
|Hardness||GB/T 531.1||Shore A||40||50||60||65||70|
|Tensile Strength||GB/T 528-2009||Mpa||7.5||9||9.5||9.5||9|
|Tear Strength||GB/T 529||KN/m||25||30||35||30||25|
|Tensile Set||GB/T 528||%||2.6||1.7||1.7||0.8||0.8|